Abstract
In order to solve the problems of fixed speed, single-way conveying, conveying speed and loom speed mismatch of knitting machine elastic belt conveying device, a design scheme of multi-line elastic band conveying control system based on I2C (Inter-Integrated Circuit) communication is proposed. The scheme realizes the real-time communication between the control host and the PWM (Pulse Width Modulation) signal output slave through the I2C protocol communication of the master-slave MCU (Microcontroller Unit). The slave machine controls the stepper motor through the subdivision circuit and the drive circuit, and uses the stepping motor to speed up and down the differential. Algorithm and speed matching algorithm to realize multi-speed variable speed elastic belt conveyor control system with good speed matching. At the same time, because I2C protocol has easy scalability, it can realize multi-channel through bus analog communication and expansion between MCU I/O ports. delivery. Finally, by setting up simulation experiments, it is verified that the speed matching between the stepping motor and the knitting machine needle is better. When the stepping motor driver (TB6600) is 32 subdivided and the duty ratio of the PWM signal is 60%, the motor speed is stable, low vibration and noise. The system can play a positive role in improving fabric tightness, improving fabric production efficiency and adjusting fabric morphology.
Highlights
The addition of elastic belt as an important way to maintain the shape and tightness of the knitted fabric can maintain the fabric’s flexibility and ductility [1]
Chen et al.: Design of Multi-Line Elastic Belt Conveying Control System for Knitting Machine the limitations of traditional conveyors in fabric doping with changing shapes
This paper proposes a control system for elastic band conveyor based on I2C protocol communication
Summary
The addition of elastic belt as an important way to maintain the shape and tightness of the knitted fabric can maintain the fabric’s flexibility and ductility [1]. Y. Chen et al.: Design of Multi-Line Elastic Belt Conveying Control System for Knitting Machine the limitations of traditional conveyors in fabric doping with changing shapes. Two single-chip microcomputers are used to simulate I2C protocol communication, and the control of the elastic belt conveying system is realized. Each time data transfer is always generated by the host microcontroller clock signal, control the speed of transmission, pulse width command, the slave microcontroller receives the host command, and executes the corresponding host command. Based on this data transmission combination method, two single-chip I/O ports are used to simulate the I2C communication protocol, which is convenient for multi-machine expansion and enhances the applicability of the elastic band conveying device
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
