Abstract

A compact band pass filter with a fractional bandwidth of 59% is designed for Ultra Wide Band (UWB) applications using a microstrip structure consisting of open circuit resonators. Transmission zeros are utilized at the passband edges to enhance the signal selectivity. The filter is characterized by sharp roll-off characteristics due to the presence of transmission zeros. The insertion loss and return loss are found to be 0.1dB and -15dB respectively. This filter has a measured 3-dB passband of (3 to 5.5) GHz, with a compact size of (13.2 x 9.7) mm. The filter offers desirable performance for the lower-band frequency of a UWB system and exhibits low insertion loss. As the structure comprises of only transmission line sections and no coupling gap, the filter is made easy for fabrication. This UWB BPF is useful to alleviate the strong WLAN signals interference to UWB receivers. To illustrate the concept, band pass filter was designed using Agilent ® ADS

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.