Abstract
This paper presents several variations of a microscale magnetic tumbling (TUM) robot capable of traversing complex terrains in dry and wet environments. The robot is fabricated by photolithography techniques and consists of a polymeric body with two sections with embedded magnetic particles aligned at the ends and a middle nonmagnetic bridge section. The robot’s footprint dimensions are 400 m × 800 m. Different end geometries are used to test the optimal conditions for low adhesion and increased dynamic response to an actuating external rotating magnetic field. When subjected to a magnetic field as low as 7 mT in dry conditions, this magnetic microrobot is able to operate with a tumbling locomotion mode and translate with speeds of over 60 body lengths/s (48 mm/s) in dry environments and up to 17 body lengths/s (13.6 mm/s) in wet environments. Two different tumbling modes were observed and depend on the alignment of the magnetic particles. A technique was devised to measure the magnetic particle alignment angle relative to the robot’s geometry. Rotational frequency limits were observed experimentally, becoming more prohibitive as environment viscosity increases. The TUM’s performance was studied when traversing inclined planes (up to 60°), showing promising climbing capabilities in both dry and wet conditions. Maximum open loop straight-line trajectory errors of less than 4% and 2% of the traversal distance in the vertical and horizontal directions, respectively, for the TUM were observed. Full directional control of TUM was demonstrated through the traversal of a P-shaped trajectory. Additionally, successful locomotion of the optimized TUM design over complex terrains was also achieved. By implementing machine vision control and/or embedding of payloads in the middle section of the robot, it is possible in the future to upgrade the current design with computer-optimized mobility through multiple environments and the ability to perform drug delivery tasks for biomedical applications.
Highlights
Microscale mobile microrobots have recently emerged as viable candidates for biomedical applications, taking advantage of their small size, manipulation and autonomous motion capabilities.Robotics at the micro- and nano-scale represent one of the new frontiers in intelligent automation systems
If this rotating field is applied on a robot that is resting on a surface, the result is a forward tumbling motion, where the robot propels itself by continuously flipping end-over-end
The control software communicates with the electronics hardware to specify the field strength, gradient and frequency of rotational fields in the workspace
Summary
Microscale mobile microrobots have recently emerged as viable candidates for biomedical applications, taking advantage of their small size, manipulation and autonomous motion capabilities. Robotics at the micro- and nano-scale represent one of the new frontiers in intelligent automation systems. They face the challenges that imply working at low Reynolds numbers (viscous forces being dominant) [1] and the effective implementation of on-board actuation, sensing, power and conventional autonomous control techniques in an extremely small footprint [2]. Alternatives to on-board power and actuation are required at these size restrictions [3], demanding the use of advanced fabrication. Targeted drug delivery is one of the key applications of these nano- and micro-robots [5]. As one moves down the length scale, the influence of adhesion and friction, which scales with surface area, becomes more pronounced, while inertia and applied forces are more unpredictable
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
