Abstract
ABSTRACTThis article introduces the use of suspended substrate microstrip lines (SSMLs) as high‐Z sections in the design of lowpass filters (LPFs) to extend the stopband. The SSMLs are formed by etching slots on the backside of microstrip lines and placing the substrate on an aluminum base with grooves that cover these slots. The higher characteristic impedance property of SSMLs brings about not only shorter length for high‐Z lines but also a larger high‐to‐low impedance ratio, thus deepening the stopband suppression and shifting the spurious passband away. As a demonstration, a wide stopband LPF combining this structure with hammer‐shaped stubs is designed, fabricated, and measured. The 20 dB stopband is obtained from 1.45 to 11.77 GHz. Compared with reported LPFs, this shows the widest fractional bandwidth (FBW) of 156% without sacrificing other performances. © 2016 Wiley Periodicals, Inc. Microwave Opt Technol Lett 58:1204–1207, 2016
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
