Abstract
Semi–empirical characteristic time models (CTMs) for NOx emissions index (EI) and lean blowoff are used in the design of an inlet condition matrix for measurement of NOxEI from a lean premixed combustor. Such models relate either NOxEI or the weak extinction limit to times representing relevant physical and chemical processes in the combustor. Lean premixed (LP) natural gas/air combustion is considered for the following conditions: inlet temperature, 300–800 K; combustor pressure, 1–30 atm; and equivalence ratio, 0.5–0.7. The NOx model is used to determine combinations of inlet conditions corresponding to greatest NOx sensitivity. A dependence of NOx emissions on pressure is included in the model. Emissions of oxides of nitrogen are found to he most sensitive to variations in inlet temperature and combustor pressure, in the 560–800 K and 20–30 atm ranges, respectively, while sensitivity to variations in equivalence ratio is substantial over the entire range considered. Thus it is found that operating conditions for high thermal efficiency in LP turbine combustors conflict with the goal of lowering NOx emissions, a result consistent with thermal NOx from conventional, diffusion flame combustors. A lean blowoff model is used to estimate the lowest equivalence ratio at which a flame can he held, as well as to determine whether a flame can be stabilised at the operating conditions suggested by the NOx sensitivity analysis. The results suggest a nominal lower limit on equivalence ratio of 0.4, and that a flame can be held for most of the combinations of inlet conditions suggested by the NOx sensitivity analysis. Autoignition of the fuel/air mixture is also considered in relation to the location and/or design of the premixing system. The current NOx CTM is applied to LP natural gas fired data from the literature. A model modification, thought to better represent the fluid mechanics relevant to LP NOx formation, is applied, and its implications discussed.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
