Abstract
This paper is focused on a novel design of stepped diaphragm for MEMS capacitive pressure sensor used in tire pressure monitoring system. The structure of sensor diaphragm plays a key role for determining the sensitivity of the sensor and the non-linearity of the output.First the structures of two capacitive pressure sensors with clamped square flatdiaphragms, with different thicknesses are investigatedand their sensitivity and non-linearityare compared together.Finally for increasing the sensitivity and linearity,anew capacitive pressure sensor with a stepped diaphragm is introduced. A numerical solution for determination of theaccurate sensitivity of the sensor is presented.The results show that the sensitivity of the sensor is increased from 0.063 fF/KPa with flat diaphragm to 0.107 fF/KPa with stepped diaphragm and also the non-linearity is decreased from 2.37% to 1.857%. In this design, the sensor sensitivity and output linearity are increased simultaneously.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
