Design of High Power Supply Rejection Ratio Complementary Metal-Oxide-Semiconductor Bandgap Voltage Reference Using Single Node Approach

Abstract

This paper describes a compact, low voltage and high power supply rejection ratio (PSRR) Bandgap voltage reference circuit by using subthreshold MOSFETs. The proposed reference circuit is implemented using 0.18 μm CMOS technology. The circuit simulation is performed using the Cadence Spectre and Synopsys Hspice. The circuit generates the mean output reference voltage of 164 mV and temperature coefficient of 15.5 ppm/°C when temperature is swept from –40 °C to 120 °C at power supply of 1.2 V. For better PSRR, a feed forward mechanism is used. The proposed design has only single transistor for start-up circuit. The measured settling time for output reference voltage is observed to be less than 4 μs. No filtering capacitor is used to improve the PSRR, which is –97 dB up to 1 MHz and subsequently reduces to –47.5 dB at 158 MHz.