Abstract
In this study, the authors present a simple reconfigurable multiband antenna with two PIN diode switches for worldwide interoperability for microwave access (WiMAX)/wireless local area networks (WLAN) applications. The antenna permits reconfigurable switching in up to ten frequency bands between 2.2 and 6 GHz, with relative impedance bandwidths of around 2.5 and 8%. The proposed antenna has been simulated using computer simulation technology microwave studio software and fabricated on an FR-4 substrate. It is compact, with an area of 50 × 45 mm 2 , and has a slotted ground substrate. Both measured and simulated return loss characteristics of the optimised antenna show that it satisfies the requirement of 2.4/5.8 GHz WLAN and 3.5 GHz WiMAX antenna applications. Moreover, there is good agreement between the measured and simulated results in terms of radiation pattern and gain.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
