Design of eddy current and capacitance dual-mode sensor for thickness detection of thermal barrier coatings

Abstract

Abstract Thermal barrier coatings (TBCs) can markedly enhance the service temperature of high-temperature alloys, thereby enhancing the engine thrust-to-weight ratio. However, TBCs must be capable of withstanding a multitude of harsh environments, including high temperatures, high pressures, and high-speed particle impacts, which can potentially lead to damage and failure. Consequently, nondestructive testing of TBCs is of particular importance for the assessment of structural health. As eddy current detection is applicable to conductive materials and capacitive detection is applicable to non-conductive materials, this paper proposes a novel, eddy current/capacitance detection, dual-mode sensor, which combines the advantages of the two detection modes. This study examines the structural configuration and excitation characteristics of the eddy current and capacitance dual-mode sensor. Furthermore, the interaction between the capacitive electrode and the eddy current coil is examined, and the viability of the dual-mode sensor is demonstrated through experimentation. The experimental results demonstrate that the dual-mode sensor exhibits a sensitivity of 2.67 mΩ mm−1 for bond coating thickness detection in eddy current mode with an excitation frequency of 5 MHz, and a maximum sensitivity of 80.31 pF mm−1 for top coating thickness detection in capacitive mode.