Abstract
Design of Double Notch Band Half-Elliptical Shape Reconfigurable Antenna for UWB Applications
Highlights
The UWB technique during the last 20 years has been used for many applications, for example, sensing and military applications, radar, etc
The Federal Communications Commission (FCC) for commercial use allocated the frequency band from 3.1 GHz to 10.6 GHz
To reach such a condition, there are a large number of an excellent antenna designs about this topic, one of these antennas was the half-elliptical microstrip antenna, which is used to operate on the overall UWB frequencies [2]
Summary
The UWB reconfigurable antenna patch can extend the operating frequency band by expanding the width of the radiating patch. The UWB characteristic has been achieved by optimizing the parameters (i.e., R1, R2 and R3) of the patch and the height (Lg) of the ground plane. At the notch band frequencies, the currents pass nearby the embedded slots are the most considerable factor, even with oppositely flowing directions around the slot boundaries. The preferred attenuation close to the notch band frequencies can be created.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.