Abstract
Water is one of the natural resources that is almost 95% needed by humans for life. In addition to humans, other living beings also desperately need water as a living source. To get clean and healthy water, people usually take water in the well and then cook until enough boiling height and can kill germs or bacteria so that the water is worth to drink. Reverse Osmosis technology used in the depot filling the gallon drinking water is much in demand by the community because it is very practical and ready to drink or used for other needs. From the results of the reflection, the water fill in the gallon was still manual, where at the time of filling the gallon, the depot still uses switches to turn on and off the water filling on the gallon. This process can be repetitive, causing the switch to become worn and damaged. The calculation of a gallon fill is still a record of how many gallons are filled and sold for a day by the owner or officer working. Design of this prototype aims to realize a device that works automatically consisting of hardware devices such as mechanical and electrical devices and software in the form of microcontrollers and other electronic components that can be charging, and recording at the time of water filling in the depot. Method used is the method of designing the mechanical, electrical and software so as to produce a tool that can facilitate the user depot refill water filling, control and recording automatically. The results of this research is based on the ultrasonic sensors by modifying the transmitter and receive distance of 1.5 cm from a standard distance of 2.5 cm, hence the result is very maximal in filling and the water pairing for all types or of peacock gallons. The measured water level is the lowest level of 2.4 cm with a time of 06.39 seconds and a high level of 8 cm with a time of 06.31 seconds.
Highlights
The source of drinking water in urban areas is generally supplied by the water Supply Company (PDAM) there are still some residents who get drinking water from the quarry well
As the growing number of people and industries are growing, causing the need for drinking water is increasing so that the water discharge that is supplied by PDAM to the customer is small and sometimes does not flow
Technology Reverse Osmosis (RO) is currently in demand by the public because it is very practical and in terms of health drinking water can be secured by the technology of Reverse
Summary
The source of drinking water in urban areas is generally supplied by the water Supply Company (PDAM) there are still some residents who get drinking water from the quarry well. There is a groundwater pollution by bacteria and harmful substances from industrial waste, as well as a practical lifestyle of the city community encourages the emergence of refill drinking water Depot. The water filling in the gallon is still manual when the water will be full in the gallon, the owner of the depot still use the switch to turn off and live the filling of water on the gallon. This process can be rethreaded so that it can cause the switch to wear and tear. This work process can be different in each drinking water refill business body, but it basically has the same filling procedure from one another. [2]
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
