Abstract
Photovoltaic arrays have high parasitic capacitance between positive/negative poles and earth. Therefore, conventional single-phase full bridge inverters with unipolar modulation are not suitable for applications in photovoltaic inverters because they have leakage currents higher than the limits acceptable by the standards. Additionally, high common mode currents tend to result in electromagnetic noise of significant magnitude. This paper proposes an integrated methodology for common and differential mode filter design for single phase full-bridge photovoltaic topology with a LCL filter. The differential mode filter is designed to meet the constraints of harmonic current distortion, while the common mode filter is designed to suit the ripple of common mode current and the filter quality factor to the design constraints. Simulation results show that the proposed methodology is simple and effective.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.