Abstract
SiC crystal substrate has been widely applied in the field of semiconductor industry and optical components recently,such as IC and semiconductor lighting. In this paper, according to orthogonal design, the composition selection and optimization of chemical mechanical polishing (CMP) slurry based on alumina (Al2O3) abrasive had been done in CMP SiC crystal substrate (0001) Si surface by a lot of tests. A CMP slurry based on alumina (Al2O3) abrasive for SiC crystal substrate (0001) Si surface had been obtained. According to the CMP test results, the material removal rate (MRR) is about 3 nm/min and the surface roughness Ra is about 0.198μm.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.