Abstract
Design of combinational circuits using dynamic logic has the advantage of high speed and less area when compared to conventional CMOS logic. However, it pose problem while cascading dynamic logic architectures and also more prone to leakage current issue. These issues are overcome by using domino logic with static inverter at the output of dynamic node. The increased power dissipation at the output node is reduced by using pseudo dynamic buffer based domino logic by having static like switching at the output node. This paper details the design of arithmetic and logic unit designed using conventional and pseudo dynamic buffer based domino logic. The arithmetic unit comprise adder, subtractor, multiplier and logical unit comprise AND, NAND, OR, NOR and XOR logic blocks based on pseudo dynamic buffer based domino logic and it is compared with the Arithmetic logic unit designed using conventional domino logic. The design and simulations are performed using UMC90nm technology node library using Cadence® Virtuoso® tool. The simulation result of ALU unit demonstrates that arithmetic logic unit designed using PDB logic has reduction in power consumption by 89.14% and delay by 1.995% while compared to conventional domino logic.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.