Abstract
Beamforming networks play an important role in today's communication systems. The Butler matrix network is one of the most useful networks used to feed array antennas and generate multi-beamforming systems. Its complexity increases with an increase in the number of input and output ports. This research work presents simulated results of an unequal amplitude 8 × 8 Butler matrix network, in which the Taylor series synthesis technique was employed to generate unequal amplitudes (-9.626, -9.125, -8.798, -8.636, -8.636, -8.798, -9.125, and -9.626 dB). The design of the Butler matrix beamforming network is based on two frequency bands, i.e., the X-band and Ku-band, with center frequencies of 9.3 and 13.265 GHz, respectively. The design mainly involves 12 hybrid couplers and eight phase shifters that can generate beams in eight different directions (-32.4°, -26.5°, -15.5°, -10.3°, 10.3°, 15.5°, 26.5°, and 32.4°). This design is based on the Taylor series expansion, which has the advantage of sidelobe level reduction of -17 dB. All of the simulations were done using advanced design system software key sight technologies. The simulations results were in line with the theoretical calculations.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
