Abstract
In this paper, a wideband bandpass filter (WBPF) with a wide stopband by using a multimode stepped impedance resonator (SIR) and tapping a stepped-impedance open-circuited stub is designed and implemented for the 3.1–4.9 GHz low band specification. The wide passband performance with a wide stopband is formed by allocating the first three resonant modes of the multimode SIR, and the band selectivity is further improved by using the stepped-impedance open-circuited stubs to have sharp attenuation rates at both lower and upper sides of the passband. Moreover, the insertion loss of the designed filter is improved by two aperture-backed structures under the inter-digital input/output ports. The fabricated WBPF exhibits a high performance, including the bandwidth of 3.3–5 GHz (3-dB fractional bandwidth of 45%), low insertion loss of 1±0.3 dB at center frequency f 0 of 4 GHz, and a wide stopband from 5.1 GHz to 11 GHz. Experimental results also show a good agreement with the simulated ones.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
