Abstract
This paper presents the design and simulation of Cantilever type RF-MEMS Capacitive shunt switch with meanders and perforations. The main objective of this paper is to reduce the pull-in voltage and increases isolation of the proposed switch. Electro-mechanics and Solid-mechanics are used to simulate the proposed switch by using COMSOL Multiphysics software. The capacitance, switching time, stress analysis are calculated and compare both theoretical and simulation results of the proposed switch. By varying different beam thickness, materials, an air gap between the beam and signal line to calculate spring constant and pull-in voltage. The proposed switch having pull-in voltage is 1.371 V, the dielectric material Si3N4 is to improve the capacitance analysis of the switch. The up and downstate capacitance is 7.073 fF, 1.259 pF. The RF performance is simulated by using Ansoft HFSS tool, the switch performs at low frequencies at 1–4 GHz range. The return (S11) and insertion loss (S12) of the proposed switch is − 30 dB, − 0.0516 dB and the switch having good isolation (S21) is − 37.5 dB at 1.5 GHz frequency. The switch is suitable for radar and satellite communication applications.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Transactions on Electrical and Electronic Materials
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
