Design of A Multi-Functional Soft Ankle Exoskeleton for Foot-Drop Prevention, Propulsion Assistance, and Inversion/Eversion Stabilization

Abstract

Stroke often results in hemiplegia, which greatly affects the walking ability of the patients. We propose a multi-functional portable ankle exoskeleton for use in preventing foot-drops, assisting propulsion, and stabilizing inversion/eversion during walking to help gait rehabilitation of stroke patients. The portable ankle exoskeleton was fabricated by 3D printing a soft/rigid hybrid structure. The device was able to prevent foot-drop and assist propulsion with a bi-directional cable-driven actuation system. It also showed a capability of stabilizing inversion/eversion motions using a counter-electromotive force of two small, lightweight gear motors. The device was controlled by a microcontroller based on real-time feedback from one inertial measurement unit and a customized force sensitive resistor. The device is fully untethered with all the components integrated on-board, with a total weight of less than 1 kg. Five healthy subjects performed over-ground walking tests with the proposed ankle exoskeleton for three different walking situations (normal walking, walking with simulated foot-drop, and walking on an uneven terrain) and three walking conditions (without the exoskeleton, with the exoskeleton powered off, and with the exoskeleton powered on). From the test results, we confirmed the feasibility of the proposed ankle exoskeleton for foot-drop prevention, propulsion assistance, and inversion/eversion stabilization. The ankle exoskeleton showed a potential for wearable gait rehabilitation for stroke patients with high mobility and portability.