Abstract
We proposed a lightweight magnetizer toward the realization of a portable circumferential magnetic flux leakage (MFL) inspection tool for the detection of longitudinal defects with a linear motion between pipes and the inspection tool. The proposed magnetizer consists of four permanent magnetic poles constructing a configuration in which the like poles are separated by a θ angle ranging from 30° to 60° and the opposite poles are separated by a supplemental angle of θ. The distribution of the magnetic field generated by this magnetizer and caused by defects was studied by finite element methods as well as by experimental measurements. The results reveal that the new magnetizer has advantages of high amplitude and good uniformity of magnetic field over the state-of-the-art ones with configurations of two facing poles or quadrupole geometries. With the new magnetizer, the theoretical and experimental results show that the magnetization in the pipe increases slightly with the θ angle, but the uniformity of magnetization in the pipe and the magnetic field on the surface of pipe decrease dramatically with this angle. So, the optimum angle θ is proposed at around 30°-40°. The finite element calculation and the measurements of the MFL signal caused by artificial defects evidence the capabilities in detecting shallow longitudinal defects of the MFL inspection tool with our novel magnetizer.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.