Abstract
Several researches are being carried out at the Politecnico di Torino with the aim of designing a high altitude very-long endurance/unmanned air vehicle (HAVE/UAV). Being able to fly in the stratosphere (15-20 km) and with an endurance of about 4 months offers an advantage and possibility that is presently not available with conventional aircraft or satellites. A computer program has been developed to design the platform. The change in solar radiation over a period of a year, the altitude, masses, and efficiencies of the solar and fuel cells, as well as the aerodynamic, structural, flight mechanics, and aeroelastic performances have all been taken into account. Extensive use has been made of high modulus graphite/epoxy when designing the structure in order to minimize the airframe weight, but also to guarantee the required stiffness and aeroelastic performance. A blended wing body (BWB) configuration has been selected for solar HAVE aircraft multi payload and operation (SHAMPO) with eight brushless electric motors, as the result of a preliminary design. The BWB solution has been designed according to the conventional procedures and airworthiness regulations. It seems to be the best compromise between performance, available surfaces for solar cells and volume for multi-payload purposes, compared to conventional design. Several profiles and wing plans have been analysed and optimized to achieve the best efficiency using the Xfoil and Vsaero computational fluid dynamics (CFD) software. A finiteelement method and a classical theoretical analysis was carried out using the Msc/Patran/Nastran code to predict the static and aeroelastic behaviour of the SHAMPO. Aeroelastic analysis has been performed starting with a classical linear flutter analysis and considering an undeformed equilibrium condition. Classical linear flutter speed show as the airworthiness requirements has been achieved in the case of SHAMPO configuration. A preliminary non-linear aeroelastic model is introduced in the design process in order to deal with specific phenomena correlated with high static structural deflections occurring during standard flight conditions. Important flutter speed reduction (i.e. up to 42 per cent in special cases) are possible including such kind of phenomena.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.