Abstract
A compact ultra-wideband bandpass filter based on a multilayer printed circuit board (MPCB) structure is proposed in this paper. RO4450F prepreg is used to bond three RO4350B dielectric substrates with different thicknesses in the MPCB structure. The upper surfaces of the three dielectric substrates are respectively provided with copper-coated structures with different patterns. The blind holes and the defected ground structure (DGS) are added to the MPCB of an ultra-wideband bandpass filter. Two groups of loaded quarter-wavelength terminal-open stubs introduce two transmission zeros, which improves the roll-off rates and stopband characteristics, while simple DGS composed of rectangular slots introduces two resonance points in the passband to improve the return loss. Simulation and measurement are consistent. The insertion loss at the center frequency of 12.795 GHz is 0.58 dB and the fractional bandwidth of 3 dB is 40.33% from 10.215 GHz to 15.375 GHz. This bandpass filter can be widely used in wireless and satellite communication.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have