Design of a 40/50 GHz satellite ground station for fade mitigation experiments

Abstract

Due to the increasing demand in satellite capacity, driven by applications such as high-definition television (HDTV), 3D-TV and interactive broadband services, higher frequency bands will have to be exploited. The capacity on Ku-band is already becoming scarce and Ka-band systems are more commonly used. It can be expected that 40 and 50GHz (Q and V band) will have to be used in the future. At these frequencies the wave propagation effects have a significant impact on the performance. The traditional approach of implementing large fade margins in the system design is not suitable as it leads to expensive ground terminals. Fade mitigation by adaptive coding and modulation (ACM) is a cost-efficient method. To investigate the Q/V-band for future commercial exploitation, ESA's ALPHASAT satellite will provide experimental payloads for communications and wave propagation experiments. In Graz a Q/V-band ground station is currently under development. It will be equipped with a 3m tracking antenna, a 50W Klystron amplifier and a 290K LNA. Fade mitigation experiments will be conducted, initially using DVB-S2 modems which allow to vary the modulation scheme, the Forward Error Correction code and the symbol rate under control of the ACM computer. In addition, uplink power control can be combined with the ACM methods. A specially developed signal analyser provides precise measurement of the signal/noise ratio. In addition, propagation data will be available from a beacon receiver, also developed by Joanneum Research. Important goals of the experiment are to investigate the reliability of links under realistic operating conditions using ACM and to develop efficient ACM and signal/noise ratio measurement algorithms which can be later implemented in optimised modems for Q/V-band.The paper describes the ground station design and addresses the planned fade mitigation experiments.