Abstract

We propose a novel liquid jet gyroscope based on electrochemical transducers, which uses electrolyte as the jet medium, and two electrochemical transducers placed symmetrically as the velocity measuring unit. The gyroscope includes a fluid pump to generate a jet flow, which flows into the jet chamber. Then, it is diverged into the shunt channels, pumped into reflux channels and merged by a fluid pump. The velocities of shunt flows are measured by two electrochemical transducers. The feasibility of the method was demonstrated in theory, and a 2D finite element model was built to simulate the dynamics of the liquid jet gyroscope. Simulation results confirm the effectiveness of the gyroscope, which has higher sensitivity in the near DC frequency band.

Highlights

  • Gyroscope is an important inertial sensing element to detect the angular rate of moving objects [1]

  • It is proven that the angular rate can be sensed by a liquid jet gyroscope based on electrochemical transducers

  • We simulatively studied the working state of the liquid jet gyroscope based on electrochemical transducers under the action of Coriolis force

Read more

Summary

Introduction

Gyroscope is an important inertial sensing element to detect the angular rate of moving objects [1]. The fluid gyroscope was studied widely in its various forms due to its small size, low cost, high reliability, high shock resistance and high vibration resistance, with thermal convective gas gyroscope being the most representative [2,3] It is especially suitable for use in the harsh environment on cars, tanks and shells. Since the thermal convective gyroscope uses gas as a jet medium, its sensitivity is limited because gas has a low density [4,5,6] On this basis, some scholars put forward a novel liquid rate gyroscope using electro-conjugate fluid to improve sensitivity, which generates a powerful jet flow under the action of a high DC voltage [4]. The 2D finite element simulation model of the gyroscope was established, the simulation results analyzed and future research direction pointed out

Electrochemical Transducer
Configuration of Gyroscope
Mathematical Model
Solver Validation
The Time Domain Response
The Frequency Domain Response
Discussion
Conclusions
Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.