DESIGN MODEL OF AUTOMATION WASHER FOR TWO TUBES APERTURE (TWIN TUBE TOP LOADER) MICROCONTROLLER BASED ATMEGA32

Abstract

Usually when doing household chores often accompany mothers with other occupations. Like when washing coupled with cooking or ironing. As a result of work performed at the same time, there is one job that is interspersed experiencing problems, eg when interrupted to cook, dishes to be burnt, or when inter spersed ironing, ironing clothes causing burns. This is due to the activity of washing process is done repeatedly like water filling, washing, emptying the water, refill the water, rinse, empty the water back, and then drying the laundry. Arises an idea how when using the washing machine manual washing can be done in a one-time process for filling and flushing. So for any housewife more time to while doing other work.Model automatic washing machines are washing machines that can wash automatically, starting from setting the amount of water, the washing process until the flushing. In this study design automation of the washing machine two openings on the standard tube (twin tube top loaders) based microcontroller ATMega32. Stagesof research began by studying the working principles of manual washing machine that will be automated, to design a model of the automatic washing machine. The design of this washing machine model consists of acontrol circuit, two water level sensors, two actuators and one DC motor as a motor washing.Water level sensors will work when the plate is implanted into the washing tube then detects the presence ofwater so that the resulting output becomes the trigger for the microcontroller. Microcontroller that would regulate and DC motor actuator. So that the washing machine automation design two openings on the standard tube (twin tube top loaders) based microcontroller has been realized. Where the water level sensor isnot affected by pressure and flow of water that flowed into the wash tube.