Abstract
This paper proposes the virtual-socket architecture in order to reduce the design turn-around time (TAT) of the embedded DRAM. The required memory density and the function of the embedded DRAM are system dependent. In the conventional design, the DRAM control circuitry with the DRAM memory array is handled as a hardware macro, resulting in the increase in design TAT. On the other hand, our proposed architecture provides the DRAM control circuitry as a software macro to take advantage of the automated tools based on synchronous circuit design. With array-generator technology, this architecture can achieve high quality and quick turn-around time (QTAT) of flexible embedded DRAM that is almost the same as the CMOS ASIC. We applied this virtual-socket architecture to the development of the 61-Mb synchronous DRAM core using 0.18-/spl mu/m design rule and confirmed the high-speed operation, 166 MHz at CAS latency of two, and 180 MHz at that of three. The experimental results show that our proposed architecture can be applied to the development of the high-performance embedded DRAM with design QTAT.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.