Design issues in the fabrication of CdS–CdTe solar cells on molybdenum foil substrates

Abstract

Abstract Investigations on CdTe–CdS solar cells on molybdenum foil substrates revealed that the depletion layer spans the entire CdS and CdTe film thickness and the cell should be conceived as a single junction device instead of the three separate junctions (Mo–CdTe, CdTe–CdS, CdS–TCO). Higher open circuit voltages were achieved when two CdS layers (separated by an air anneal) were used instead of a single CdS layer. The high series resistance of this solar cell continues to be the limiting factor in cell performance. Modeling and design issues for improving cell performance are presented.