Abstract
CoFe lamination stacks used for high-performance electric motors can be manufactured economically in high volumes by interlocking. In order to ensure sufficient joint strength with minimized sheet thickness, a comprehensive knowledge of the influences of various process parameters, such as embossing depth, clearance and counter punch force, is essential. To analyze these parameters, which also influence the magnetic properties, experiments are carried out and resulting joint strengths are determined in top tensile tests. The negative influences of the cutting process on magnetic conductivity and thus hysteresis losses due to residual stresses and plastic deformation are well known. In the subsequent stacking step, an influence of embossing and pre-stresses on the material properties is expected. In addition, local electrical contacts between the sheets may occur due to the interlocking process, causing additional eddy currents. Loss measurements are conducted to investigate the effect of the joining process on the magnetic properties of the stack. In doing so, the influence of process parameters such as the embossing depth and clearance on eddy current power losses is analyzed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IOP Conference Series: Materials Science and Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
