Design, Fabrication, and Locomotion Analysis of an Untethered Miniature Soft Quadruped, SQuad

Abstract

The conventional robotics, which involves utilization of robots made out of hard materials like metals and hard plastics, has helped humankind automate many different sorts of labor and such robots have been assisting the humans in various tasks. Nevertheless, some applications require very delicate interactions and adaptability of the robots to unstructured elements and obstacles; which can only be provided by softness. The miniature and untethered robot in this work is fully made out of soft structural materials and uses a flexible circuit board. Only the electronic components, actuators and several little connection parts are hard. Its soft legs, body, and circuit enables it to overcome obstacles that conventional hard miniature robots tend to be stopped by. For the soft robot presented, walking and obstacle climbing experiments were done and pitch angle, roll angle, robot's centroid position and stiffness analyses were conducted. Additionally, three other robots are fabricated in hard body - hard leg, hard body - soft leg, and soft body - hard leg configurations and the effects of body and leg compliance on the locomotion performance are investigated. The results show that a soft body - soft leg robot configuration can scale an obstacle 1.44 times its body height whereas the hard bodied and hard legged robot can only go over 0.88 times its body height. The results also indicate that the softness of the body effects the scalable obstacle height more than the softness of the legs at this length scale.