Abstract
Deployable drag sails are used for passively deorbiting defunct satellites and other spacecraft. Designing the deployable boom is the main challenge in this technology. We present a bi-stable shape memory polymer composite (Bi-SMPC) boom with high stiffness, a high unfolding/folding ratio, and consistent roll-out deployment. It was designed and fabricated by a strategy of controlling the gradual release of elastic energy stored in a bi-stable composite structure through thermal-driven SMP matrix. Two heating layer strategies were investigated experimentally to determine the optimal driving layer and driving parameters. Based on these parameters, verification tests of a four-stage deployment Bi-SMPC boom were conducted. Meanwhile, a proof-of-concept prototype of a four-stage deployment drag sail based on the Bi-SMPC booms was designed and fabricated. Tests were conducted to verify the effectiveness of the drag sail deployed by the booms. It was found that SMPs can effectively control the deployment of bistable composite structures. The nickel-chromium alloy heating layer offers a more uniform driving temperature field compared to carbon fiber. The drag sail can be deployed successfully under the driving of four Bi-SMPC booms.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.