Abstract
Design, construction, and starting-up of an upflow anaerobic sludge blanket reactor was carried out. This system was proposed for excess sludge stabilisation, particularly that generated at an activated sludge wastewater treatment facility installed in a sugarcane mill. The upflow anaerobic sludge blanket (UASB) reactor built, had a working volume of 22.3 m3and a hydraulic residence time of 22 days. Methane production was at a maximum of 79% volume with an average of 60% for this treatment. For starting up the anaerobic reactor, a suitable inoculum from a neighboring plant was used. As the waste characteristics in both plants were different, an acclimation procedure was followed to achieve granulation. Control and stability of anaerobic reactions were monitored with alkalinity data, using the so-called ‘alfa alkalinity’ to try to keep its value at around 0.4. Once pseudosteady-state conditions were reached (chemical oxygen demand reduction and methane-rich biogas production within ±10 percent), the organic load was steadily increased up to feeding 100% excess sludge. The UASB reactor used to stabilise the excess biomass generated a sludge with a much lower volume than that originally fed. Its design ensured adequate hydraulic flow and biogas production with a high methane content. The bacteria were attached constituting spheres and very minor maintenance operations were required.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have