Design considerations for the volutes of centrifugal fans and compressors

Abstract

The initial conceptual design of centrifugal fan and compressor volutes is considered and extended to accommodate overhung volute designs often used in process and turbocharger compressors. The initial passage design is then developed through the application of a commercial computational fluid dynamics (CFD) code.’ Based on the experimental data of a turbocharger compressor volute, three-dimensional, compressible, steady flow computations were carried out for alternative volute designs. Detailed internal flow data in both a conventional and a modified volute design, at both design and off-design flow conditions, are presented. The design investigation showed that enlarging the flow passage area near the tongue region, but without changing the exit-inlet area ratio of the volute, led to an improvement in the internal flow distribution at off-design flow conditions.