Abstract
System ringing in load measurement during dynamic tests is investigated with a second order system consisting of a mass, a spring and a damper. According to the analysis of the time-domain and harmonic performances, a procedure for designing load sensor to relieve the influence of system ringing is proposed. Subsequently, a practical design of load sensor and its application procedure are presented. The dynamic test results of two metal materials under strain-rates of 10, 100 and 200 s−1 show that the sensor is effective for reducing system ringing. Based on this design, system ringing as well as the influence of several design variables is investigated with the help of Finite Element simulations. Simulation results indicate that the loading velocity and the stress–strain relation of the tested material are the two important influential factors. In the end of the paper, recommendations are made for the design of load sensor and the position for placing strain gauges.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
