Abstract

HighlightsA multi-pin flexible pick-up gripper with a four-jaw chuck having four pick-up pins has been developed.The gripper can effectively grasp, hold and release plug seedlings with low damages to the plants and the root soil.Based on a typical on-off control and cylinder stroke position detection, the control system for timely response was designed to automate the process of picking up and releasing seedlings.Abstract. A multi-pin flexible seedling pick-up gripper for automatic transplanting was developed and evaluated. The gripper having a four-jaw chuck mainly consists of a parallel-type air gripper with four fingers, four fork frames, four cylinder fingers, and several connecting/supporting parts. The air gripper moves to open and close the cylinder fingers, and the cylinder fingers each having a flexible pin grasp and release the seedling. When the pick-up gripper extracts seedlings from the tray cells, its four cylindrical fingers push out four pick-up pins to penetrate deep into the root soil and then close, making the pick-up pins to firmly hold the root soil for lifting. When the pick-up gripper releases seedlings, its fingers open, making the pick-up pins loosen the root soil and then pull back for discharging. An electrical and pneumatic control system was designed to coordinate the execution of each action. The pick-up gripper attached to a robotic manipulator was tested on a range of plug seedling transplanting parameters and conditions. The results showed that penetration depth, seedling species, and the interaction of working pressure and seedling species significantly influenced the successful automatic transplanting. On the whole, the seedling integrity ratio in automatic transplanting was found to be up to 93.37%. For optimum performance of the device in transplanting seedlings, the pick-up pins of the multi-pin gripper need to grasp the maximum amount of root soil at their maximum penetration depth. Keywords: Gripper, Flexible, Multi-pin, Seedlings, Transplanting.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call