Design and testing of a sew-free origami mask for improvised respiratory protection

Abstract

Respiratory aerosols with diameters smaller than 100 μm have been confirmed as important vectors for the spread of diseases such as SARS-CoV-2. While disposable and cloth masks afford some protection, they are typically inefficient at filtering these aerosols and require specialized fabrication devices to produce. We describe a fabrication technique that makes use of a folding procedure (origami) to transform any filtration material into a mask. These origami masks can be fabricated by non-experts at minimal cost and effort, provide adequate filtration efficiencies, and are easily scaled to different facial sizes. Using a mannequin fit test simulator, we demonstrate that these masks can provide filtration efficiencies of over 90% while simultaneously providing greater comfort as demonstrated by pressure drops of <20 Pa. We also quantify mask leakage by measuring the variations in filtration efficiency and pressure drop when masks are sealed to the mannequin face compared to when the mask is unsealed but positioned to achieve the best fit. While leakage generally trended with pressure drop, some of the best performing mask media achieved <10% reduction in filtration efficiency due to leakage. Because this mask can provide high filtration efficiencies at low pressure drop compared to commercial alternatives, it is likely to promote greater mask wearing tolerance and acceptance.