Abstract
This numerical work developed and analyzed a HVAC system, based on horizontal confluents jets system, in summer typical day conditions placed in a virtual office chamber. Presents and applies a numerical model, developed by the authors in the last years, that considers the coupling of the CFD and HTR. In the input data are used the Computer Aided Design geometry, the location of the occupants and the external environmental variables, while the occupants’ geometry is generated by empirical equations, based in height and weight. Above the head level, six air ducts, connected to the ceiling area, compose the exhaust system. The inlet system was based on four vertical ducts with 0.15 m diameter, located on the corner of the office chamber, are equipped with consecutive holes who promotes horizontal jets near the wall. The thermal comfort, the indoor air quality, the Draught Risk, the effectiveness for heat removal, the effectiveness for contaminant removal and the ADI are evaluated.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.