Abstract
Vortex tube is a thermodynamic device, with no moving parts, applied to separate hot and cold air from compressed air injected into the tube. It has many applications in the industry, for example, among others, it can be mentioned electronic systems cooling, machining processes cooling and environmental chambers. This paper presents the design and tube dimensioning based on parameters and data found in the literature. Therefore, a prototype has been made and tested, which allowed the understanding of the influence of internal tube diameter and width on the hot and cold air temperatures while submitted to compressed air with pressure varying from 1 to 2.5bar. Results of tested configurations indicates that the relation between tube length and diameter (L/D) has small influence on vertex tube behavior, meanwhile, 3/8” tube diameter shows lowest temperatures on cold flow (-6.5°C, -8.0°C and -8.5°C) and higher COP (≈ 0.15).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.