Design and Simulation of MIMO Systems over Rayleigh Fading Channel and Using Near-Maximum-Likelihood Detection

Abstract

While coding is the main element for the success of the MIMO system implementation, the communication channel is the main component that ascertains this. This paper describes the design and simulation of a 2x2, 4x4, and 8x8 MIMO system which is used exclusively in 5G mobile systems. The detection performed in such a system is near-maximum-likelihood detection. The noise added at the front end of the receiver is additive white Gaussian noise with zero mean and variance which depends upon the signal-to-noise ratio (SNR) while the signal is transmitted over a frequency-selective Rayleigh fading channel. The MIMO system operates at a much higher level of complexity to exploit the channel space-time resources. Orthogonal space-time block codes are used at the transmitter. An Image is transmitted and the received image is compared with the transmitted image and BER is calculated. This is done for varying SNRs. The whole project is performed over a front-end application where the various parameters are populated and run. This makes the simulation extremely easy for the 2x2 or 4x4 or 8x8 MIMO application with varying channel parameters. The modulation scheme used in this work is BPSK.