Abstract
n-Butyl acrylate is commercially produced from acrylic acid and n-butanol using strong acidic homogeneous catalysts. To overcome problems related to corrosion, catalyst removal from product and catalyst disposal after neutralization, research based on solid catalysis received increased attention in the recent years. However, design and control studies of an entire plant are rare. In this paper, the design and control of two reaction-separation-recycle process alternatives are developed. Both use a fixed-bed reactor with Amberlyst 131 catalyst. The separation of n-butyl acrylate from the mixture with n-butanol and acrylic acid is difficult. One of the process alternatives achieves the separation by distillation at pressure above atmospheric, while the other conveniently employs extractive distillation with ethylene glycol. Both processes are controllable, the control system showing robustness when increase or decrease in production capacity is required, or operating conditions change. Aspen Plus and Aspen Plus Dynamics are used as efficient Computer-Aided Process Engineering tools.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have