Abstract
Herein, finite‐element analysis is used to optimize the performance of mid‐infrared (MIR) (7.7–13.7 μm) waveguides by selecting optimal waveguide and substrate materials, waveguide size, and boundary field. The results show that a diamond waveguide has a substantially higher sensitivity than Si‐ or Ge‐based waveguides owing to its higher boundary evanescent field at the same depth. Furthermore, it is found that AlN substrates have better optical stabilities than SiO2 and Si3N4 substrates, because AlN substrates do not have apparent absorption characteristics in the MIR range (7.7–13.7 μm). Geometry of diamond waveguide on AlN substrate is optimized, and a section length of 45 μm is chosen for optimal signal transmission quality. The calculations of the infrared attenuated total reflection (ATR) of the diamond waveguide applied to water, alcohol, and diisopropyl methyl phosphate are highly consistent with the actual infrared absorption spectrum. This proves the feasibility of applying AlN/diamond waveguides in MIR ATR detection, which is of great significance for the preparation of high‐sensitivity MIR detectors.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
