Abstract
In this study, a novel miniature I-shaped linear ultrasonic motor is proposed. The motor is constructed by two rectangular piezoelectric vibrators which are mounted in parallel with the slider to make the structure look like the letter “I”. The symmetric and antisymmetric modes of the motor based on the first-order flexural vibrations of the two vibrators are chosen as the working modes. The finite element method is adopted to optimize the structure and study the vibration behavior of the motor. A prototype of the proposed linear ultrasonic motor is fabricated and its mechanical characteristics are tested. The dimension of the stator is 39.8 × 17.6 × 6 mm3 and the weight of the prototype is only 18.2 g. The typical outputs of the prototype are maximum speed of 364 mm/s, maximum thrust of 500 g and thrust-weight ratio of 24.47. The experimental results confirm that the developed linear ultrasonic motor has the advantages of structural design and miniaturization.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
