Abstract

In this paper, an annular Fresnel solar concentrator (AFSC) is proposed. This novel concentrator was incorporated with a series of annular mirrors, and its performance was simulated using MATLAB software. The influences of different structures were also simulated. The tracking deviation, device deviation, and comprehensive deviation were analysed using different deviation angles. The results demonstrated that this concentrator could simply adjust the concentrating ratio, which reached 300 when the maximum concentrator height was 0.78 m and the maximum diameter was only 1.72 m. Non-linear changes in the performance of the annular Fresnel reflector occurred when the structure size increased linearly. Further, the radiation distribution and performance of the annular Fresnel reflector were found with different deviations. When the tracking deviation angle was 0.5°, the receiving rate was 98.37%. This new AFSC has excellent concentrated solar power (CSP) application prospects.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.