Abstract
In this brief, a low profile, broadband, high-gain antenna array based on optimized metamaterials (MMs) with dual-beam radiation is reported for 5G millimeters wave (mm-wave) applications. The design is a simple bow tie operating at a 5G band of 28 GHz. It consists of two bow ties with substrate integrated waveguide (SIW)-based power splitter. A broad impedance bandwidth of 26.3.29.8 GHz is obtained by appropriately combining the resonances of the bow ties and the SIW. Further, the antenna exhibits symmetrical dual-beam radiation at ±25∘ over a broad bandwidth in the end-fire direction due to the arrangement of the two radiators. A MM array has been etched in the same substrate shared with the antenna to improve the gain performance while preserving compact size. The trust-region (TR) gradient-based algorithm is used to optimize the structure dimensions and to achieve a maximum gain of 12.2 dB at 29 GHz. The developed MM-based antenna is validated experimentally with a good matching between the simulated and measured data. The system features a small size, low profile, high gain, broad bandwidth, and dual-beam in the E-plane, demonstrating its suitability for 5G mm-wave indoor scenarios.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IEEE Transactions on Circuits and Systems II: Express Briefs
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
