Design and Optimization of MEMS Resonant Pressure Sensors with Wide Range and High Sensitivity Based on BP and NSGA-II.

Abstract

With the continuous progress of aerospace, military technology, and marine development, the MEMS resonance pressure sensor puts forward the requirements of not only a wide range but also high sensitivity. However, traditional resonators are hardly compatible with both. In response, we propose a new sensor structure. By arranging the resonant beam and the sensitive diaphragm vertically in space, the new structure improves the rigidity of the diaphragm without changing the thickness of the diaphragm and achieves the purpose of increasing the range without affecting the sensitivity. To find the optimal structural parameters for the sensor sensitivity and range, and to prevent the effects of modal disturbances, we propose a multi-objective optimization design scheme based on the BP and NSGA-II algorithms. The optimization of the structure parameters not only improved the sensitivity but also increased the interference frequency to solve the issue of mode interference. The optimized structure achieves a sensitivity and range of 4.23 Hz/kPa and 1-10 MPa, respectively. Its linear influence factor is 38.07, significantly higher than that of most resonant pressure sensors. The structural and algorithmic optimizations proposed in this paper provide a new method for designing resonant pressure sensors compatible with a wide range and high sensitivity.