Abstract
In order to solve the problem of inconsistent moisture content in particles during the drying process of tiger nuts (Cyperus esculentus) due to uneven air flow and temperature distribution in the drying chamber, an open-hole corner box was designed based on the principle of negative pressure micro-perforated air supply. Using computational fluid dynamics (CFD) and discrete element method (DEM) simulation, coupled with the basic theory of interphase heat and mass transfer, a mathematical model for interphase heat and moisture coupling transfer was established. The effects of different aperture rates of corner boxes in the drying chamber, spatial location arrangement, and other related variables on the airfield distribution, temperature field distribution, tiger nut temperature, and moisture content changes were investigated. The results show that the average air velocity below the air inlet gradually increases as the opening ratio increases. When the opening rate is 0.33%, the wind field uniformity is better, and the inhomogeneity of the drying chamber wind field is improved. As the lateral distance increases, the consistency of the moisture content distribution increases and then decreases, and the flow rate of the tiger nuts gradually increases when the grain is discharged. The rate of decrease in water content decreases gradually with the increase in longitudinal distance. When the wind speed reaches 4 m/s, the drying chamber wind field is more uniform, and the water vapor diffusion efficiency at the outlet is basically the same. Therefore, the appropriate corner box has a horizontal distance of 320 mm and a longitudinal distance of 420 mm, providing a basis for the design of tiger nut drying equipment.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.