Abstract
Abstract The power output of a straight-bladed H-rotor Darrieus vertical axis wind turbine (HDVAWT) is explored in this article. The comparisons are performed between the NACA0018 airfoil and a series of Kline Fogelman modified NACA0018 airfoils. The computational fluid dynamics findings are first cross-checked with the experimental data, and the computational processes are validated as a consequence. Then, in CATIA, 12 airfoils were constructed by modifying the step thickness, step placement and trailing edge form to get an efficient model for the wind turbine. The approved computational processes are applied to all 13 models, and the results are obtained. In comparison to the NACA 0018 airfoil, the KFm3 airfoil with 12% step thickness and a rectangular trailing edge demonstrated a 47% efficiency under 6.65 m/s wind velocity and a rotational velocity of 120 RPM. The KFm3 airfoil also performed better when tested at 80 and 162 RPMs. Thus, the final HDVAWT has been presented for real-time applications, which is the primary goal of this work; also, the proposed HDVAWT outperforms all existing vertical axis wind turbines.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.