Design and Modeling of a Six-Degree-of-Freedom Magnetically Levitated Positioner Using Square Coils and 1-D Halbach Arrays

Abstract

This paper presents a novel design of six-degree-of-freedom (6-DOF) magnetically levitated (maglev) positioner, where its translator and stator are implemented by four groups of 1-D Halbach permanent-magnet (PM) arrays and a set of square coils, respectively. By controlling the eight-phase square coil array underneath the Halbach PM arrays, the translator can achieve 6-DOF motion. The merits of the proposed design are mainly threefold. First, this design is potential to deliver unlimited-stroke planar motion with high power efficiency if additional coil switching system is equipped. Second, multiple translators are allowed to operate simultaneously above the same square coil stator. Third, the proposed maglev system is less complex in regard to the commutation law and the phase number of coils. Furthermore, in this paper, an analytical modeling approach is established to accurately predict the Lorentz force generated by the square coil with the 1-D Halbach PM array by considering the corner region, and the proposed modeling approach can be extended easily to apply on other coil designs such as the circular coil, etc. The proposed force model is evaluated experimentally, and the results show that the approach is accurate in both single- and multiple-coil cases. Finally, a prototype of the proposed maglev positioner is fabricated to demonstrate its 6-DOF motion ability. Experimental results show that the root-mean-square error of the implemented maglev prototype is around 50 nm in planar motion, and its velocity can achieve up to 100 mm/s.