Design and investigation of a capacitance-coupling pre-ionized sharpening switch.

Abstract

The sharpening switch is one of the most important elements in the trigger generator, which is used to sharpen the front of the trigger pulse. The breakdown performance of the sharpening switch has an important influence on the output and stability of the trigger generator. In this paper, a novel 200kV capacitance-coupling pre-ionized sharpening switch, which can realize pre-ionization by dividing voltage through its own structural capacitances, is proposed and investigated. In order to obtain the optimal parameters of the pre-ionized sharpening switch, the influences of the electrode structure, electrode material, main gap distance, and pre-ionized gap distance on the breakdown performance are studied experimentally. The experimental results show that the electrode structure with a circular knife-edged cathode and a plate-shaped anode has the smallest breakdown jitter, followed by the needle-plate structure and the tapered ball-head structure. The stainless steel electrode has the smallest jitter, followed by graphite, aluminum, and brass electrodes. When the gap distances of the main gap and the pre-ionized gap are 13 and 1.5mm, respectively, the breakdown stability of the pre-ionized sharpening switch is the best. Under an input voltage pulse with a rise time of about one microsecond, the jitter of the capacitance-coupling pre-ionized sharpening switch with the optimal parameters is 6.08ns, which is about 0.6% of the rise time of the input pulse. The jitter decreases by 44.5% compared to the switch without pre-ionization. The rise time of the output pulse is sharpened to 17ns, corresponding to a voltage rise rate of more than 11 kV/ns.