Abstract
Metering the traffic of a flow and dropping the portion of traffic that exceeds the target rate set by the meter is very important to provide quality of service (QoS) in a network. Most existing switches on the market provide the meter function. Although these meters regulate the traffic of a UDP flow very well, according to our tests, they are not TCP-friendly. For example, we found that a TCP flow passing the meter of a commercial switch can only achieve about 10% of the target rate. Based on our studies, we found that this poor performance is due to the bad interactions between the TCP congestion control and the meter function. In this paper, we design and implement a TCP-friendly meter in the packet processing pipelines of a P4 switch. Experimental results show that our meter regulates a TCP flow very well and can maintain its achieved rate within 5% of the target rate. Compared with the meters in several hardware switches, our meter improves the achieved rate of a TCP flow by almost 85% of the target rate.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
