Abstract
Water is the most essential element for human life after air, hence the amount and quality of water resources must be monitored by the appropriate government agencies. The goal of this research is to create and implement an IoT‐based rivers monitoring prototype system. Two basic components make up the proposed system: the first component represents the node points, and the second component represents the control point. In order to achieve continuous updates of the information via Internet from the node side, ESP32 with its built‐in Wi‐Fi adapter was utilized. The node should pinpoint three major situations, Normal, High. and Low of river water, and then transfer it using IoT to the control point to take an action depending on conditions at the river. © 2023 Institute of Electrical Engineer of Japan and Wiley Periodicals LLC.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IEEJ Transactions on Electrical and Electronic Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
