Design and Implementation of Electrical Parameter Monitoring System Based on ZigBee Wireless Communication

Abstract

In order to solve the problems of many lines, troublesome movement and redundant management of traditional electrical parameter monitoring system, a design and implementation of electrical parameter monitoring system based on ZigBee wireless communication is proposed. Taking the monitor as an example, this paper briefly introduces the application status of the monitor monitoring system and electrical safety detection. According to the comparison of wireless communication technology and the analysis of actual demand, this paper expounds the advantages of ZigBee wireless technology. Based on the combination of received signal strength indication (RSSI) ranging algorithm and trilateral positioning algorithm, the wireless positioning of mobile targets is realized. Then, the sparse correlation matrix of signal attenuation coefficient between base stations is established in the upper computer to optimize the positioning by using the look-up table method. The relevant test results show that through the serial port test software 2000 times of data transmission and reception, 1866 times of communication are successful, and the success rate is 93.3%, which basically meets the requirements of data transmission stability; After data transmission time detection, it takes about 1.4 seconds to send data from the monitor to the client for reception. The client sends the module query command, and the time when the command reaches the monitor is 1.6 seconds. The data transmission speed can basically meet the requirements of real-time monitoring. The design and implementation of the monitoring system can not only help to reduce the workload of medical staff in hospital nurse stations and improve their work efficiency, but also provide the possibility of practical significance for developing into an application tool for patient family members or personal health management in the future.